Description FeaturesSpecsVideoCompatibility InfoFeatures Seat-Lock fastening system for quick assembly Bag has an internal stiffener and four compression straps; this fixes the contents very well to the saddle and seat post Compatible with lowerable seatposts through additional adapter clamp (height: 4.3cm) Ideal for bikepacking, alpine cross, tours Mounting via lever on the saddle rail and via strong Velcro fastener Lightweight, robust PU-coated nylon fabric Valve with handle loop to compress the pack volume Elastic cord fixations on the upper outside for quick stowage of additional equipment Protective plate on the bottom prevents damage from tire contact Removable without residue Daisy chain for attaching rear light or additional equipment 3M Scotchlite reflectors Specs dimensions (l/w/h): 480/220/280mm max. load: 5kg volume: 13l textile fabric: PS21R, PS33 technology: IP64 Waterproof Standard bag properties: waterproof Color: Black weight: 625g Video Compatibility Info YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13 mm from the middle of the bend in the saddle rail. There must also be at least 13 mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14 mm higher than the bottom edge of the saddle rail. THE FOLLOWING PRODUCTS ARE NOT SUITABLE: Saddles with carbon fiber rails, or carbon fiber seatposts Suspension seatposts Saddles with unusual saddle rails e.g. SQLab Active, Brooks B67 (see point 2 above) Electronic dropper posts e.g. Rock Shox AXS or Magura Vyron If you still have problems mounting the Seat Pack QR for the first time, try moving the Seat Lock System as far forward on the bag as possible and loosen the bolts to find a fitting position. This is the easiest position for initial mounting – you can then adjust the position for the best fit. The fitting instructions have further information and tips.
