PLC Vespa V50 V90 V100 Sport PV ET3 125 PK Silent Block Rubber Engine Mount Set

DescriptionRubber Engine Mounting Bush engine swing-arm pivot, left/right, orange, PLCfor Vespa 90 2°-125/​PV/​ET3/​PK80-125 S/​PK125/​ETS/​N/​XL2PRODUCT DESCRIPTIONIntact rubber engine mounting bushes are important for good handling characteristics. If you ride your Vespa on a daily basis, like to lean into bends or regularly transport heavy loads, you should think about replacing these items more often. If you race your scooter this job is a must, but even commuters will be pleasantly surprised by the smoother ride that a bush replacement rewards you with. Engine mounting bushes isolate your motor from the frame to reduce any vibration caused by the running engine to be transmitted to the chassis of your scooter. We have these items in stock for most models of Vespa and the bushes for earlier Vespa models are regularly reproduced in small production runs, as well as PIAGGIO still being able to deliver replacement items for most of the later models.The racing specialists from PLC have adopted the theme of the Silent rubbers for Vespa Smallframe and Lambretta models. These are mounted on a brass bush and radiate in the racing orange or GT green colour.The oranges are meant for the race track. The greens and the black ones are somewhat softer and are designed for everyday life. Regardless of whether the engine revision of a series or racing engine. New PLC Silent rubbers are mandatory! Conclusion: You should replace the engine mounting bushes during every major service or upgrade of your motor, especially if you have fitted harder shock TOP-TIP: Ideally, you should also replace the metal spacers and bushes for better suspension. Copper paste can be used to prevent corrosion. If performance shock absorbers are fitted, do not forget to upgrade the rest of the suspension assembly.