DescriptionCentre stand-BGM PRO Soft Stop V2 System- Sprint150 (VLB1T),Rally180 (VSD1T),Rally200 (VSE1T),Super,GT/GTR125 (VNL2T),TS125 (VNL3T),GL150 (VLA1T) -galvanisedOEM numbers (for comparison purposes only) Piaggio 91047, 71968, 92960, E.2005, E2005, 54152, E.605, E605BGM PRO Main Stand V2 => now with adjustable stopADVANTAGE STOP RUBBER The BGM PRO main stand with Soft Stop System puts an end to stand feet hitting hard on the floor plate. The stand stop is now positioned on the sturdy mounting plates on the central frame tunnel, as on the Vespa PX models. The main stand is ideally stopped here via a rubber buffer without causing the floor panel to vibrate. So not only is the noise when folding much more pleasant, the stand with Soft Stop technology also protects the frame. Cracks in the floor panel, caused by the original main stand, are thus forever history.NEW Version V2 The stop rubber is now individually adjustable by means of thread. Thus, the main stand can be perfectly adjusted to the own vehicle as well as the desired distance to the frame. For example, the main stand can have an extra wide distance to the floor panel to be able to use it very comfortably at any time. On the other hand, the main stand can be adjusted close to the floor panel to always have maximum ground clearance available.The Soft Stop stand is supplied with kickstand plates. These have additional run-up plates against which the main stand rests. This avoids direct contact between the stand tube and the frame and additionally protects the frame (ex works the original Piaggio stand rubs directly against the painted base plate!)SUPPLY For mounting longer screws are needed, these are enclosed in the set. The main stand spring and stand feet can of course be used from the original stand, but alternatively these can also be found in the accessories
